DJTechTools May 26, 2016

Pioneer DJ have finally released the Rolls Royce of a DJ setup they had teased earlier in the year to a curious crowd at NAMM 2016.While most fixatedon the fivelarge screens attached to the top, a few were asking the questions about the other new features included in andaround each device. Guest contributorDan D-Squared sharessome insight on what Pioneer DJ was thinking behind this over-the-top design of a productline.

Who Is The Pioneer DJ TOUR-1 For?

The big question everyone is asking themselves is ?Who is this system for?? and the blunt answer is “probably not you.” At least not yet.

An overhead of both units - click to zoom and see all of the details.

An overhead of both units – click to zoom and see all the details.

This system is really for the most popular “big name” DJs of the world, who are playing on the biggest stages andsound systems week after week. This TOUR-1 system is for:

  • artists whose booking costs are in the tens of thousands or even hundreds of thousands for a 1-2 hour set
  • artists who have a full crew they tour with, includingaFOH engineer, lighting technician andvisual team
  • DJs who have specific requests for equipment on their artist riders which if not met by the show provider means a breach of contract and a cancellation of their performance on the spot

These DJs all exist, and we all havemany opinions abouttheir talent, the music they play, and if they deserve to be where they are.

Playing OnMulti-Million Dollar Soundsystems

So why is this new riga big deal to you if it?s not something most DJswillget a chance to even touch? The TOUR-1 appears to be made to givethe crowds of people at these huge shows the absolute best experience possible. When paying upwards of $500 a ticket to go to a festival, your level of expectation is veryhigh. The audienceexpects the absolute greatest display of stage design, visuals, lighting, fireworks and more. No expense is overlooked when it comes to the finer details.


Having the best possible sound at a festival is a big deal. When you?re a DJ playing in front of 50,000 to 100,000 people at EDC, Ultra, or Tomorrowland on a multi-million dollar sound system, every thing you can do to improve on that has a cascading effect on the end result of sound.

Every sound system, no matter how expensive and technologically advanced, is only as good as the weakest link in the chain. That chain starts at the DJ booth.

Pioneer DJ has recently startedadvocating for higher quality sound in DJ booths – specifically on the NXS2 line,increasing their D/A conversion inside to 96kHz/24-bit and advocating the use of more lossless formats like FLAC.

For most real-world scenarios, a 320kbps MP3 track is enough of a balance between file size, affordability, andperceivable quality when jamming out tunes at a club. But when you?re playing on a 300,000-watt stereo system specifically designed to deliver the clearest truest signal at the maximum volume level without distortion, MP3 begins to lose its benefits.

Significant New I/O On DJM-TOUR1

The back of the DJM-TOUR1 - Click To Zoom

The back of the DJM-TOUR1 (click to zoom)

Enter the Pioneer DJTOUR-1 system. Pioneer DJ has added some new features throughout the mixer to take full advantage of massive sound systems. On the back of the DJM-TOUR1 you?ll notice a few changes:

  • The Booth output changedfrom 1/4? TS to XLR.this is a great addition as I can tell you the first thing we do at festivals when hooking up mixers is plug a 1/4? to XLR adapter on each Booth port to run the signal to the FOH snake back to the mixing console for tweaking. Most DJs who are playing on stages have requested a substantiallylarge monitoring rig that will almost always take XLR inputs, so not having to use adapters always is a nice benefit.
  • An ethernet hub built into the mixer with NEUTRIK etherCON connectors. The ethernet connectors on the backs of CDJs andDJMs are typically the first thing tobreakafter years of abuse. They can only take so many times of unplugging/replugging before the soldered connector breaks off inside. NEUTRIK etherCON is a much more secure connection, which means your mixes will not lose their link connectivity as easily should some cables get accidentally moved slightly mid set.
  • TheSPDIF Master Out (found on the DJM900 series) has been replaced with a Digital AES/EBU. This allows for a single, secure, digital line to be ran straight from the mixer to the FOH mixing console at a festival. Digital cable runs over several hundred feet long are generally better than long analog runs as the signal doesn?t degrade. However the cost of the cable itself is vastly more expensive than your typical XLR run.Read more about the AES3 specification in this Sound on Sound article.
  • There’s also now aWord Clock Input – this isa signal that tells pieces of gear when exactly to sample audio at each sample rate interval. The more accurate your Word Clock, the less jitter you get in your A-D D-A process, which translates to a much more accurate sound reproduction. Read a solidpost here explaining Word Clock in more detail.
A FOH engineer at Ultra - photo credit

A FOH engineer at Ultra – photo credit

All these improvements area hugedeal for Front Of House audioengineers at festivals who are relying on the DJ to deliver a clear, clean, consistent signal that they can then tweak to sound best on the speakers. FOH engineers are actively listening and know how sound is, for lack of a better word, supposed to sound. They understand the frequency response of the speakers, the physics of the room or environment they are in, the reflections coming off the crowd or roof and any correction to the audio signal that can be made to steer it back to it?s ?true? sound.

As a DJ, you are behind the main speaker system, you do not have any idea whatsoever how it sounds out in the audience. You have to have a working relationship with your FOH engineer to deliver the cleanest, clearest, consistent signal possible from the mixer so that the FOH engineer has to do minimal adjustments to make sure the signal maintains the sound you?re hearing in your headphones amplified at ~110dB in a large open room or outdoor environment. So this combination of upgraded internal sound card quality, using lossless audio files, digital connections throughout to minimize signal degradation and Word Clock to keep your mixer?s sample rate in constant sync is the ultimate combination for delivering the ?truest? sound possible.

  • There’s also now adedicated Internet port for KUVO integration. KUVO is Pioneer?s social network which aims to deliver track information that DJs play to people in the audience. It still remains unknown if KUVO will ever gain popularity.
  • There’s also another NEUTRIK etherCON port labeled Extension. We don’t know the purpose yet – it could possibly bea means to send Rekordbox information to the visual / lighting team to sync up scenes to the music playing with relative ease. Or perhaps this is for daisy-chaining DJ mixers, similar to such afunction on the PLAYdifferently mixer.

Cue, Aux In + Send/ReturnsOnDJM-TOUR1

The top of the DJM-TOUR1 has new features designed for many different DJs to use the mixer

The top of the DJM-TOUR1 has new features designed a rotating lineup ofDJs quickly to use the mixer

  • On the top of the mixer, Pioneerhas added a second independent headphone cue system –useful for sets with twoor more DJs playing at the same time, trying to cue up multiple tracks without having to listen to the other person?s adjustments.
  • Pioneer DJ has also included a separate auxiliary channel on the mixer with its own dedicated TRS/XLR input combo jack. This is for DJs who are using their own soundcard, mixer, or controller with audio interface, but still would like to hook their signal into the DJ mixer without having to disconnect anything. Plus,theBeat FX can be applied on the auxiliary channel.
  • Oddly, the 1/4? TS Send/Return Input/Outputs have moved to the top of the mixer. This seems a bit out-of-place as you?ll now have fourcables randomly sticking straight out the top of the mixer – but perhaps it is because Send/Returnhardwaremight be changing with each new DJ.

What About The Screens?

The DJM-TOUR1's screen showing four vertical waveforms

The DJM-TOUR1’s screen showing four vertical waveforms

Of coursethe biggest cosmetic change of all is the addition of the screens. Rather than re-designing the existing fourtouchscreens on the CDJs, Pioneer DJ has added a secondtouch display on each CDJ, which essentially shows the same information on the screen below, albeit more in-depth and higher resolution. This seemsa bitcounter-intuitive to the design and further adds to unnecessary bulk of the CDJ. It puts a barrier between the performer and the audience they are working to interact with and almost seems like too much of a distraction of information at once.

They?ve also added a screen on top of the DJM, which now shows:

  • more accurate detailed metering such as RMS level vs. Peak of each channel & master output, or
  • all current track waveforms in a linear or horizontal layout.

The added information display is surely nice, but is it really needed given that there is already a touchscreen on each CDJ? Pioneer DJ may have been better off to redesign those screens toaccommodate the information they wish to display on these large, seeminglynon-removable screens. The hinge mechanism that the screens fold down with also looks like a potentialfailure point during transit and setup/breakdown – not exactly ideal on a high-cost piece of touring gear. While they do include a sun shade, it remains to be seen just how effective they will be or what anti-reflective coating each screen has.

Only Ready For The Big Time


The thing to take away from all this is that although these TOUR1 units are made for a very specific purpose currently, it is a good indication that at least some of these features may find themselves in the DJ gear of the future at the more consumer grade level of price point. Features typically get added to the most high-end gear first and slowly trickle their way down to mainstream equipment as the years pass on.

It’s certainly no harm to at least learn what the purpose of each of those functions do, and how you might make use of them, should you ever come across some form of equipment that has one or more of those features down the road. The TOUR1might not show up in theaverage DJ booth, but rest assured that the DJ booths it does end up in will be delivering the absolute best possible sound quality for the large audiencesin front of them.

Nowthe music chosen for that sound, that?s an entirely different subjective story…

The post Why The Pioneer DJ TOUR-1 Matters To Festival DJs + Sound Techs appeared first on DJ TechTools.